Centrifugal vibrators 
Linear vibrators 
Special vibrator for pipeline 
Suction-cup vibrators 
Impact type vibrators 
Gas disc for silo Stainless steel pneumatic hammer
Stainless steel pneumatic hammer (energy storage impact type)
The impact strength of the stainless steel pneumatic hammer (energy storage impact type) is adjusted by adjusting the air supply pressure. If the knocking force is too small to prevent the blockage, the air pressure can be increased. On the contrary, if the knocking force is too large, the pressure will be reduced. If the customer chooses the wrong model, the impact force is too strong or insufficient, and the pressure can also be adjusted to solve the impact of the hammer. This structure that can change the impact force ensures the convenience of air hammer selection. If the air hammer is installed with relay piping, several units can run at the same time. The construction cost is greatly reduced.
Product features
? All made of stainless steel, widely used in the pharmaceutical industry.
? One-click, each action generates a shock wave.
? Impact force and impact interval can be adjusted as required.
? High-strength 304 stainless steel housing, stainless steel mounting base, stainless steel clamp.
? Utilizing the principle of pneumatic energy storage, the hammer head is momentarily stressed and the impact force of the air hammer is increased.
The air hammer output force can only make a single impact for a small range, which has the least impact on other equipment. Such impact will not cause the moisture content of the raw materials to be separated out or the raw materials of the mixture to be separated again. Commonly used in the cleaning of tanks of scales, prevention of blockage of pipes or elbows, tanks of materials with high moisture content or mixed raw materials or low specific gravity.
Copyright ? 2016 Ningbo Kechuan Power Technology Co.,Ltd ，All Rights Reserved.
